Replace DF filter element compressed air filter element 1100 1C486084 1C486085 1C486083 1C

The published standard capacity of the DF series of compressed air filters is based on an inlet pressure of 100 psig and an inlet temperature of 100F. When these conditions change, a given DF series filter will be able to purify compressed air more or less than its standard capacity. This information can be used in two ways. The first is to start with a specific Donaldson DF series filter size, and recalculate its capacity according to the known operating conditions using the correction factor g

Basic Barameters

Brand: HUAYUANFILTER

Model: 1C486084,1C486085,1C486083,1C486081,1C486080,1C486086

Filtration accuracy: 1μm~100μm

Country of origin: China

Filter media: Oil, water, air

Filter element type: Micron precision filter

Length: standard

jack@cnxyfilter.com

Features Parameters Related

The published standard capacity of the DF series of compressed Air Filters is based on an inlet pressure of 100 psig and an inlet temperature of 100°F. When these conditions change, a given DF series filter will be able to purify compressed air more or less than its standard capacity. This information can be used in two ways. The first is to start with a specific Donaldson DF series filter size, and recalculate its capacity according to the known operating conditions using the correction factor given below. The other is to select the appropriate Donaldson DF series filter size according to the given operating conditions and apply the correction factor to the flow rate.

Filtration Grades

P-filter Particle filter	Initial differential pressure : 0,15 bar 1 Efficiency : 100% related to 25 µm
B-filter Particulate filter	Initial differential pressure : 0,12 bar 1 Efficiency : 100% related to 25 µm
A-filter Activated carbon filter	Initial differential pressure : 0,15 bar 1 Residual oil content : 0,003 mg/m³ 3
V-filter Coalescense filter	Initial differential pressure : 0,11 bar 1 Residual oil content: < 0,2 mg/m³ 2
M-filter Coalescense filter	Initial differential pressure : 0,11 bar 1 Residual oil content : < 0,02 mg/m³ 2
S-filter Coalescense filter	Initial differential pressure : 0,13 bar 1 Residual oil content : < 0,01 mg/m³ 2
1 related to nominal performance at 7 bar, dry condition 2 related to a inlet concentration of 3 mg/m³ 3 when upstream connected a M- or S-filter

Technical Parameter

		Replacement Elements
			Pre - Filter		After Filter
Range	Std Housing w/o element	Electronic Drain	P	B	V	M	S	A
0035	1C484060	1C334050	1C486004	1C486005	1C486003	1C486001	1C486000	1C486006
0070	1C484180	1C334050	1C486014	1C486015	1C486013	1C486011	1C486010	1C486016
0120	1C484300	1C334050	1C486024	1C486025	1C486023	1C486021	1C486020	1C486026
0210	1C484420	1C334050	1C486034	1C486035	1C486033	1C486031	1C486030	1C486036
0320	1C484540	1C334050	1C486044	1C486045	1C486043	1C486041	1C486040	1C486046
0450	1C484660	1C334050	1C486054	1C486055	1C486053	1C486051	1C486050	1C486056
0600	1C484780	1C333104	1C486064	1C486065	1C486063	1C486061	1C486060	1C486066
0750	1C484900	1C333104	1C486074	1C486075	1C486073	1C486071	1C486070	1C486076
1100	1C485020	1C333104	1C486084	1C486085	1C486083	1C486081	1C486080	1C486086