The main function of RFBN/HC1300DP10D1.1/-L24 replacing HYDAC filters is to filter hydraulic oil, and various impurities are inevitably present in the hydraulic system. The main sources are: mechanical impurities that remain in the hydraulic system after cleaning, such as rust, casting sand, welding slag, iron filings, coatings, paint skins, and cotton shavings, as well as external impurities that enter the hydraulic system, such as dust entering through oil filling ports and dust rings; Impurities generated during the working process, such as fragments formed by hydraulic pressure on sealing components, metal powders produced by relative wear during movement, and gum, asphaltene, carbon residue, etc. produced by oxidation and deterioration of oil. After the above-mentioned impurities are mixed with hydraulic oil, they will have a destructive effect everywhere with the circulation of hydraulic oil, seriously affecting the normal operation of the hydraulic system, such as causing small gaps (in units) between relative moving parts in hydraulic components, as well as jamming or blockage of throttle holes and gaps; Destroy the oil film between relative moving parts, scratch the surface of the gap, increase internal leakage, reduce efficiency, increase heat generation, intensify the chemical reaction of the oil, and cause the oil to deteriorate. According to production statistics, more than 75% of faults in hydraulic systems are caused by impurities mixed in hydraulic oil. Therefore, maintaining the cleanliness of the oil and preventing oil contamination is important for hydraulic systems.

Replacing DFBH/HC60TC10CD1.0/2M0 filters

FLND BN/HC 160 DDF 25 LZ 1.2 Double tube pipeline filter

Double tube pipeline filter RFLDBN/HC951DAT20D1.0/-L24

Replacing HYDAC Dual Barrel Filter FMNDBN/HC60LDD-C1.X-L24

FMND BN/HC110LDD10D1X/- L220 dual cartridge filter