The polyester fiber gas Filter Element is made of 4 different materials and different deniers of filter materials that are continuously wound. The first layer is a strong support layer for filtering accuracy control and coalescence separation, the second layer is a pre-fine filtration coalescence separation layer, the third layer is a dirt holding and coarse filtration layer, and the fourth layer is a coarse filtration dirt holding and filter element surface strengthening layer. If there are special needs, conductive fiber (antistatic), activated carbon fiber (deodorization) and ultra-high precision filter layers can be added between the first and second layers, and between the second and third layers.

Product features:

1. There are up to 19 filter layers, and the filter element can hold a huge amount of dirt:

2. → Multiple flow modes → High efficiency;

Thermal bonding technology - High strength

Can withstand a pressure of 40KG/cm3

No iron mesh support is required unless it is under extreme conditions

3. Thermal bonding technology: does not contain adhesives, is not afraid of strong corrosion such as acids and alkalis and various solvents, will not debond or loosen, and because it does not contain solvents, it can greatly reduce damage to the environment and operators;

4. The pipe head welded by EPE thermal bonding technology has high strength and can withstand the strength of a truck weighing >400KG;

5. Single synthetic fiber is easy to recycle after replacement.