MDF BH/HC 240 O F 20 B 1.0 hydraulic oil filter is used to filter out metal particles, pollutants, and other impurities in fluid media, which can protect the normal operation of equipment. When the fluid enters the filter, its impurities are blocked, and the clean filtrate is discharged from the filter outlet. When cleaning is needed, simply remove the Filter Element from the filter, treat it with industrial liquid, and then install it.

Testing standards

ISO2491 filter cartridge - anti rupture test

ISO2492 Filter Cartridge - Structural Integrity Test

ISO2493 Filter Cartridge - Material and Liquid Compatibility Test

ISO3723 Filter Cartridge - End Load Test Method

ISO3724 Filter cartridges - Determination of fatigue characteristics of filter cartridges

ISO3968 Filter Cartridge - Determination of Differential Pressure Flow Characteristics

The high-pressure filter, which replaces the Hydac filter, consists of a filter cover and a screw in housing. The filter cylinder with a specification flow of 660 or below is a one-piece structure, while the filter cylinder with a specification flow of 990 or above is a split structure

The replacement HYDAC filter element is made of epoxy resin, which is mixed fully and evenly in strict accordance with the specified ratio of *, to achieve the effect of high bonding strength, corrosion resistance, aging resistance and high temperature resistance (greater than 100 ℃). Good compatibility, medium is oil film bearing oil, and it should have good filtration effect. The structural integrity is good, and the filter layer, outer protective net, and end cap are tightly bonded, firm, and durable.

The filtration accuracy is 10um, the filtration area is ≥ 2.5m, and it can withstand a compression force of 2.0MPa; Under normal use, the impurity content of the filtered oil is ≤ NS8 level.