HUAYUANFILTER ion exchange resin regeneration Filter Element EPT600508 is used in the EH refractory fuel regeneration system of steam turbines in power plants to filter water, solid particles, colloidal substances and other pollutants in the working medium to ensure the quality and effective control of fireproof fuel Contamination of working medium. Ensure the normal operation of the system. The filter element uses advanced coalescing materials to ensure the technical performance and quality of the filter element, with large dirt holding capacity and long service life; the coalescing material is a composite structure and adopts layered coalescence to gradually increase the size of tiny droplets. Greatly improve the working capacity and service life of the filter element; the coalescing materials are all reinforced with special resin and technology, even under the impact of high flow rate and strong pressure pulsation, there will be no short circuit or fiber shedding; oil and water resistant adhesives are used to ensure the filter element The two ends are bonded firmly and reliably, and the filter material is connected firmly and tightly. 

Product Features:

1. The ion exchange resin filter element is made of all stainless steel, the working pressure can reach 1.0MPa, will not break, and will not cause pollution.

2. Strong acid removal ability, 700% higher than diatomaceous earth, 250% higher than activated alumina and modified alumina. And it can keep the acid value of the anti-fuel oil in the EHC system below 0.08.

3. Improve the resistivity of anti-fuel oil to avoid electrochemical corrosion of components.

4. It will not release metal ions, will not react with refractory fuel to produce gelatinous metal phosphate, and will not cause servo valve bonding failure.

5. It can filter out the metal ions (Ca, Mg, Na, Fe) produced by the diatomaceous earth filter in the refractory fuel. And control the content of various metal ions in the refractory fuel below 10ppm.

6. Using spherical ion exchange resin, the particles are uniform, will not leak, and will not resist fuel pollution caused by particles

7. Acidic substances in refractory fuels are treated by adsorption instead of neutralization. No water is produced during the treatment, so vacuum dehydration is not required.